Most of us don’t give our Fix Whirlpool Ice Maker in Freezer much thought, until it leaves us with no ice and a lukewarm drink. Why is my Whirlpool refrigerator ice maker not working? The freezer temperature may be too high, limiting production. Figure out what’s causing the problem with these ice maker troubleshooting tips.
Whirlpool makes some of the best refrigerators on the market. One of their best features is their ice makers, which are known to produce large quantities of ice automatically without you having to fill the ice trays up with water. But sometimes the ice maker can stop working and will need to be reset or repaired.
If your Whirlpool ice maker has stopped working, there’s no need to panic, as it’s an easy thing to fix. You usually just have to reset it.
There are four main ways to Fix Whirlpool Ice Maker in Freezer: press the reset button, adjust the feller arm, turn your fridge off and on, or unplug the appliance. In this article, we will tell you how to do each one.
Have you ever gone to the fridge to grab a cold glass of ice water, only to find that your ice maker isn’t working? It’s a frustrating, but not uncommon, experience. iGloo Ice Maker is Not Working are trained and certified to fix all major home appliances, so they know how to get your ice marker working properly again. Here’s their step-by-step guide for ice maker troubleshooting.
Why is my ice maker not working?
There are a number of potential reasons your refrigerator is not making ice—but most have simple solutions.
The most common causes are:
- The water fill tubes are blocked.
- The water inlet valve is blocked or frozen.
- The water filter is dirty or clogged.
- The heating element in the ice machine isn’t functioning.
- A pause command has accidentally been enabled.
- The thermostat is set too low.
- The control arm is out of position.
Why Is My Whirlpool Refrigerator Ice Maker Not Working?
While a part malfunction is possible, the most likely reasons for a Whirlpool refrigerator ice maker not working have a Fix Whirlpool Ice Maker in Freezer. From the wrong freezer setting to a water filter that needs changing, here’s how to restore ice maker function.
Freezer Temperature Too High
A Whirlpool ice maker won’t make enough ice or will produce misshapen cubes if the freezer temperature is too high. For optimal ice production, make sure your freezer temperature is set between 0-5℉.
If the temperature is properly set and the freezer temperature is still too warm, check the refrigerator’s condenser and evaporator coils. If your refrigerator runs all the time, the condenser coils may need cleaning. Meanwhile, frosted-over evaporator coils could indicate a defrost system malfunction.
Ice Maker is Jammed
During ice production, the ice maker’s harvest fingers may also bring up icy water with the newly-formed ice cubes. This water can freeze onto other ice maker components, creating an ice bridge that jams the harvest fingers during the next cycle. How do you know when your Whirlpool ice maker jammed? The cubes may be smaller or ice production will stop completely. You’ll also notice a visible accumulation of ice around the ejector arm.
Water Filter Requires Replacement
Often, a Fix Whirlpool Ice Maker in Freezer is due to a water filter malfunction. If the filter becomes clogged or is incorrectly installed, water flow to the ice maker will be restricted. When this happens, your ice maker won’t produce ice in large amounts or the cubes may be smaller or misshapen.
Water Supply Issue
If your refrigerator doesn’t receive adequate or consistent water from your home supply the ice maker can’t produce ice.
The following water supply issues can affect ice production:
- Water line is incorrectly connected: Make sure the line is correctly connected to a cold water supply and that the water supply valve is turned on.
- Kink in water line: If the water line is kinked it can block the flow of water from your home supply to the refrigerator. Gently straighten any kinks and make sure there’s adequate space between the wall and the refrigerator to prevent kinking.
- Faulty water inlet valve: The refrigerator’s water inlet valve opens and closes to allow water to supply the refrigerator as needed. If the valve doesn’t open completely or is stuck in the closed position, water won’t supply the ice maker. A faulty water inlet valve requires professional replacement.
Failed Ice Maker Component
If you still find your Fix Whirlpool Ice Maker in Freezer dumping ice like it should, a failed component may be stopping ice production. If the motor on the ice maker module fails, the ejector arms won’t cycle to release ice or the water inlet valve may not open. When the mold thermostat malfunctions, the ice maker won’t refill the ice molds when they reach the proper temperature.